Reed Electrical Services, LLC.

What You Need to Understand About Electrical Wiring Upgrades for Your Property

Older homes and commercial properties typically contain electrical systems that were never built to handle modern power demands. Wiring upgrades solve this problem head-on, replacing deteriorated, unsafe, or undersized wiring with safe and up-to-date materials and configurations. At our team, we take pride in delivering wiring upgrades that keep your family safe for decades ahead.

Residential and commercial clients contact Reed Electrical Services, LLC. when they notice warning signs — burning smells, warm outlets — or when they add major appliances or EV chargers. Wiring upgrades aren't just for older homes; they are a necessary step in the long-term health of any building's infrastructure.

Our experienced crew have served Palos Hills, IL and the surrounding southwest suburbs with top-tier wiring upgrades for homes, rental units, and small businesses. Whether you have cloth-wrapped wiring, two-prong outlets throughout, or an overloaded panel, we bring the knowledge and equipment to get it done right.

What Are Wiring Upgrades?

Wiring upgrades refer to the structured removal and installation of a property's electrical conductors and termination points to match today's safety and capacity requirements. This involves far more than switching out a fixture or plug. A full wiring upgrade means running fresh conductors throughout the structure. The age and condition of the existing conductors shapes how the job is approached.

Cloth-insulated or rubber-jacketed wire found in mid-century homes creates distinct problems that modern copper wiring simply does not. Knob-and-tube has no grounding path and the surrounding insulation breaks down over decades. Aluminum branch-circuit wiring loosens at connection points more readily than copper, which leads to dangerous heat buildup at outlets and switches. Wiring upgrades eliminate these hazards permanently.

At its core, the procedure requires isolating each circuit before removing and replacing and threading new properly-rated cable through conduit or framing cavities. Updated termination points and overcurrent protection replace all old hardware throughout the system. Every new run is then verified under load to ensure proper voltage and continuity.

Top Advantages Wiring Upgrades

• Dramatically reduced fire risk — Cloth-wrapped or aluminum conductors is one of the leading causes of residential structure fires. Wiring upgrades remove that risk entirely.
• Meeting current NEC standards — Real estate transactions and remodeling permits often require verified code compliance. Wiring upgrades bring everything into compliance.
• Handling EV chargers, smart home systems, and more — Households now run more high-draw devices. Wiring upgrades size conductors correctly for every circuit.
• Better rates from your homeowner's insurer — Many insurance carriers surcharge or even refuse to insure properties with outdated electrical systems. Documenting the completed wiring upgrades may eliminate those surcharges entirely.
• Full equipment grounding throughout the structure — Circuits without a ground path leave equipment vulnerable. Wiring upgrades bring grounding to every outlet in the structure.
• Better home appraisal results — Outdated wiring is a common deal-breaker in real estate. A documented electrical upgrade strengthen your listing.
• Reduced nuisance tripping and power fluctuations — Old conductors struggle under load and cause instability. Wiring upgrades deliver the clean, steady current your appliances need.
• Knowing your building meets current safety standards — There is real value in knowing that the electrical infrastructure you depend on is safe, rated correctly, and properly installed.

The Wiring Upgrades Procedure From Start to Finish

1. Whole-System Inspection — One of our certified professionals arrives and performs a full walkthrough of the electrical system. We identify the type of wiring present and flag any immediate hazards. This inspection drives the entire upgrade plan.
2. Tailored Wiring Upgrade Proposal — Using what we learned during the assessment, our team outlines every circuit and area to be upgraded. We clarify what can be retained and what must be changed and give you a clear breakdown of costs. Applicable local permits are addressed here so everything is above board from the start.
3. Permit Coordination and Project Scheduling — Our office coordinates with the local authority having jurisdiction for you. We set a timeline based on the scope and your schedule. We make sure the required inspections are built into the timeline so every completed phase gets signed off.
4. Active Wiring Upgrade Work — Our licensed electricians de-energize and isolate each circuit before removing old wiring and devices. Properly-rated NEC-compliant conductors is pulled through walls, conduit, and framing. Modern code-compliant devices at every termination point complete each new circuit run.
5. Energizing and Verifying Every Circuit — Once wiring is complete, each circuit is carefully brought back online. Our electricians use digital meters and circuit analyzers to verify voltage, continuity, and ground integrity. Any issues found during testing get fixed before the circuit is approved.
6. Code Authority Review and Approval — The authority having jurisdiction walks through the upgraded system to verify code compliance at every circuit. Our electrician attends the inspection alongside the code official to make sure the sign-off process goes smoothly. Sign-off from the inspector wraps up the official documentation, giving you legal confirmation the wiring meets code.
7. Project Wrap-Up and Owner Orientation — Prior to calling the project done, a member of our team walks the property with you. We explain what was upgraded, where, and why, answer any remaining questions. You receive copies of the permit and inspection records for your files, insurance copyright, or future buyers.

Who Is a Good Fit for Wiring Upgrades?

Homeowners who benefit most typically fall into a few clear categories. If your home was built before 1970 often retain the electrical system that was installed at the time. This applies to fuse-panel-fed circuits, ungrounded receptacles throughout — all of which fall short of current standards. If an inspector or insurance adjuster has already flagged your wiring, wiring click here upgrades are no longer optional.

Property owners converting a garage or finishing a basement also need to evaluate wiring upgrades as part of the project. Submitting plans for an addition often triggers mandatory wiring inspections. Putting in a whole-home EV charging setup or adding a large standby generator depends on conductors rated for the demand. Landlords and property managers benefit particularly from staying ahead of wiring issues.

Not every situation calls for a full upgrade, when a home was constructed in the modern era and carries documentation of prior licensed upgrades, the scope of work may be limited to targeted repairs. We only propose wiring upgrades when the condition and risk level justify them — your safety and budget both matter to us.

Wiring Upgrades FAQ

How much time does a wiring upgrade usually take from start to finish?

Duration varies based on the size of the property and scope of the project. Upgrading a single floor or section can often be completed in a day or two. A whole-home rewire across a typical residential property typically requires a week or less of active work. Getting the municipal sign-off can extend the total project timeline slightly.

What does wiring upgrades typically run in Palos Hills?

The cost of wiring upgrades depends on project-specific details including how much wire needs to be replaced, the property's square footage. Upgrading a specific section of wiring tend to be significantly less expensive than full-structure wiring replacement. Reed Electrical Services, LLC. delivers transparent proposals prior to starting the job — no hidden fees or scope creep after the fact.

Will the upgrade process require us to vacate?

The majority of the time, you can remain in the home during wiring upgrades. Our crew works section by section, which keeps most of the home powered. Kitchens and bathrooms are prioritized to minimize daily disruption. In rare cases involving full service disconnections, we give you clear advance notice of the outage window.

Is all knob-and-tube or aluminum wiring unsafe?

Age alone doesn't make wiring automatically catastrophic — but older wiring carries compounding risks that grow over time. Cloth-wrapped wire with cracked or missing insulation can and does cause fires. We give you a clear picture of what's actually there — not a sales pitch, just the findings.

Does completing wiring upgrades affect my insurance premiums?

In most cases, the effect is positive. Many major insurance carriers actively penalize homes that still contain outdated wiring types. Completing wiring upgrades and providing documentation may qualify you for lower rates or remove exclusions. Speaking with your copyright before and after the project so they can update your policy to reflect the completed work.

Wiring Upgrades for the Palos Hills Area Homeowners and Property Owners

Palos Hills and the surrounding southwest suburban communities contain a significant number of properties constructed between the 1950s and 1970s that still carry original electrical systems. Reed Electrical Services, LLC. works regularly throughout the region, including residential streets around Palos Hills City Hall and the adjacent subdivisions. Residences around the Richard J. Daley College-area neighborhoods, near the Southwest Highway corridor, or close to the Cal-Sag Channel corridor commonly fall into the age range where wiring upgrades make an immediate and lasting difference.

Coordinating with Palos Hills building officials is something our team handles routinely. Our history working in the area means smoother permitting and permits close on time because we know the process. Whether you own a single-family home or a multi-unit building in our community, wiring upgrades come with the same attention to detail and licensed workmanship that has built our reputation in this area.

Ready to Book Your Wiring Upgrades Consultation?

Whether you've been thinking about wiring upgrades for a while or just received an inspector's report, our licensed electricians can put together a clear plan and a straight-forward estimate. There is no single upgrade with a stronger return a property owner can make for safety, insurability, and long-term reliability. We deliver the credentials, the workmanship, and the documentation to see every upgrade through to a passed inspection and a satisfied client. Reach out now to set up your initial evaluation — and find out exactly what your electrical system needs.

Reed Electrical Services, LLC. | 9735 South 81st Avenue | Palos Hills IL 60465 | (708) 837-9993